4
Battery Power
1. The amp uses 10 " D " size Alkaline batteries
(not
included)
;
or the optional rechargeable AmpliVox
NiCad Battery Pack (S1465) and (S1460) AC adapter
-
purchase separately
(Fig 3).
2. Open case and locate battery holder
(Fig 1).
3. Lift the battery holder out
(Fig 2).
4. Install 10 fresh Alkaline " D" size batteries. Be sure to
observe the polarity when putting batteries in the
battery compartment. The negative (flat) ends go
against the springs. Carefully replace battery holder.
DO NOT MIX BATTERY TYPES OR ATTEMPT TO RE-
CHARGE ALKALINE BATTERIES. EQUIPMENT DAM-
AGE, SAFETY HAZARD OR FIRE COULD RESULT.
Note:
The battery holder cable comes from the factory
already plugged into the connector. If it comes
loose, push it in securely. (Turn the plug over if it
doesn’t fit; it only fits one way.)
5. Close case.
6. If using the S
-
1465 NiCad Battery pack
(Fig 3),
and
S1460 AC Adapter/ Recharger
power supply (both sold separately), plug
into the
“ DC IN”
jack on front panel of the
amp. Plug into a working electrical outlet.
Charge 24 hours for full charge before using.
Fig 3
Fig 2
Fig 1
INSTALL BATTERIES
S
-
1460
S
-
1465
1-
800-572-2194 • DISPLAYS2GO.COM
