4
2.4 GHz WIRELESS MICROPHONE HEADSET
Features
•
Microphone
Charge and sync with amplifier before placing
on head. See Power Switch Below.
As shown, wireless microphone is designed to be
used on the left side of face. Place wire band
around back of head, coming to rest just to the top
of both ears.
Remove the foam windscreen. You can see the
shape of the microphone. The front must be posi-
tioned in front of your mouth to work correctly.
Replace the foam windscreen.
•
Mini USB Connector—Charging
As previously mention, you want to charge your
headset before using. Take the cord with the
USB / mini USB connector and insert the mini
USB plug into the connector on the wireless mi-
crophone headset. Insert the USB plug into the
AC adapter connector and plug into AC outlet for
charging. When charging, a red LED will light next
to the button. When fully charged, LED
will turn off. It is now ready to use.
When batteries are low the charging LED will
begin to flash. Stop and charge.
•
Power Switch—Syncing to Amplifier
Turn both the amplifier and headset on. The
headset will automatically sync with the amplifier.
During the syncing process the charging LED will
blink green. When the headset and amplifier are
paired together the green LED will stop flashing
and stay on. On the amplifier, a yellow LED will
light up on the face of the amplifier and will stay
on.
•
Volume
You can use the UP + and Down— buttons to
either increase or lower the volume of the head
set. For best performance, start with the amplifier
volume at a low setting. Increase the volume first
on the headset then on the amplifier.
Charging LED
Volume UP
+
Volume Down
Power Switch
Mini USB Connector
Microphone
Front
