Amplicon Impact-E 30, User Manual

Page: 13 / 40

Impact-E 3x series embedded computer user manual
Page 13 of 40
2.2 Jumper Settings and I/O Connectors
The jumper settings and I/O connectors of the embedded board have
been set to default as standard. Any changes to the schematic or design
of these connectors may cause damage to your unit.
Default jumper settings and I/O connector summary are as below:
JUMPER FUNCTION
SC2T1
Select COM2 Type Jumper
SC2T2 Select COM2 Type Jumper
PCOM1 Select COM1 Pin9 Signal Jumper
KM1
Keyboard/Mouse Connector Header (for Factory test only)
USBG1 USB Port#7 5-Pin Power Connector (5P Male)
SODIMM1 200 PIN DDR2 SODIMM Socket
SC3T1
Select COM3 Type Jumper
SC3T2 Select COM3 Type Jumper
VLCD1
Select Panel Voltage Header (Reserved)
LVDS1
LVDS Connector (Optional)
CCMOS1 Clear CMOS Data Jumper
PS4S1
4-Pin Power Connector (4P Male )
SATA1 Serial ATA-SATA Socket (Port 1)
SATA2
Serial ATA-SATA Socket (Port 2)
LNI1
Line In 3Pin Connector
CF1
Compact Flash Connector
MPCIE1 Mini PCI Express 1X Connector
PCIGF1 120 Pin PCI Golden Finger
PCIEGF1
PCI Express 1x Golden Finger
COM1/2
Serial Port COM1/2 Connector (D-SUB9 Male)
DGIO1 DIO Connector ( D-SUB9 Female)
CN1 COM3 – 6 Connector
CN2
DC-IN Connector (9 ~ 36V)
PSW1 SW Connector (ATX Power Switch Connector)
PSBTN1 PW-ON Button
Manual
Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com
IT and Instrumentation for industry Amplicon.com