Amplicomms TV 2410NL, Wiring & Installation Manual, Page: 15 / 59

Helpline UK 0844 800 6503
(See page 14 for costs and hours of operation)
Troubleshooting
No sound
- Ensure that the mains adapter is pushed fully into the power outlet and
that its cable is properly connected to the DC IN connector on the trans-
mitter.
- Ensure that the receiver power ON/OFF switch is switched to ON.
- The charge level of the battery inside receiver may be too low. Recharge
the battery or replace it with a fully charged battery.
- Ensure that the TV set, Hi-Fi system or audio component is switched ON
and set to a channel that broadcasts an audio signal.
- Use the volume control on the receiver to increase the sound level.
- The connected audio/video equipment may not be in playback mode.
Start playback on by the equipment.
- The receiver output level is set too low. Adjust the volume to a suitable
level.
- Try using a different connection RCA, SCART or HEADPHONE or use the
supplied microphone.
Distortion
- The charge level of the battery inside the receiver may be too low. Rechar-
ge the battery or replace them with a fully charged battery.
- The receiver may be too far away from the transmitter. Move closer to it.
- The audio signal input level is too low. Increase the volume from the
audio source.
- The audio signal input level may be too high, lower the volume from the
audio source.
O
PERATION
10