![Amplicomms PowerTel M6000 Operating Instructions Manual Download Page 82](http://html1.mh-extra.com/html/amplicomms/powertel-m6000/powertel-m6000_operating-instructions-manual_2934887082.webp)
Emergency Call Function
82
In the case of an emergency call:
The phone dials the 1st emergency call number.
When a connection is established, the SOS
message you recorded is sent. The connection then
remains active for approx. 10 seconds before the
next number is dialled. If a phone number is
engaged" or an answering machine takes the call,
the mobile phone automatically dials the next
emergency call number (after approx. 1−2 minutes).
When the called party receives your emergency call
they will hear your recorded voice message and
must accept the call by pressing 0. Your Emergency
call is now in hands free mode. Remember to switch
the emergency call switch off.
Starting the emergency call
Slide the
emergency call switch
upwards. A siren is
sounded. The phone dials the set number.
Depending on the settings selected, the number is
redialled or the next number is dialled.
Ending the emergency call
After making the call or to cancel the emergency call,
slide the
Emergency call switch
back down.
Terminating the man down" SOS
If the function is triggered unintentionally, slide the
Emergency call switch
up and then immediately
back down again.
Service−Hotline: 0844 800 6503 (Using an UK landline, at the time of going to print:
calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)