23
Service−Hotline: Tel. 0844 800 6503
(Mon. to Fri. 9:00 - 17:00)
GB
Using the RingFlash 250
Disconnect the existing telephone con
-
1�
nection line from the phone currently
used�
Connect the end of the telephone cable
2�
just disconnected in the telephone line
port LINE (10) in the RingFlash 250 base
station�
Then plug the telephone line supplied in
3�
your telephone.
Connect the other end of the telephone
4�
cable to the telephone connection port
TEL (12) in the RingFlash 250 base stati
-
on�
Now connect the power adapter plug sup-
5�
plied to the power outlet�
Plug the cylindrical plug on the power
6�
adapter plug in the connection port for the
adapter plug (11) in the RingFlash 250
base station�
As soon as the RingFlash 250 base
station is connected to the power supply
network, the RingFlash 250 base stati
-
on issues an acoustic signal to indicate
correct installation� If there is no acoustic
signal, disconnect the power adapter
plug from the power socket. Check the
connections on the RingFlash 250 base
station� Wait for 1 minute and plug the
power adapter back in the power socket�
