background image

Note: Once a profile has been selected to use when making a call, the phone 

will return to the default settings after 30 seconds.

Changing Menu Settings

Handset ringer melody — 

There are ten ringer melodies. Default setting is 7.

Handset ringer volume — 

There are five volume levels plus 

OFF

.

Tone (“Equalizer”) setting — 

There are three tone settings, LOW/MID/

HIGH. Default is MID.

Note: To adjust tone while making a call, press the 

REDIAL

TONE

CID

OGM

MEMO

button to 

access the equalizer setting, press the 

CID/FLASH

OGM       MEMO

 

or 

REDIAL/P

OGM       MEMO

 

button to adjust the 

setting. One can also use + VOL or - VOL on right side of handset to reach 

preferred equalizer / TONE setting.  

Switch keypad beep on or off — 

Turns on or off the keypad beep.

Change contrast — 

There are five normal (BLACK ON AMBER) screen

contrast levels and five negative (AMBER ON BLACK).

Switch “auto talk” on or off — 

The phone will automatically answer

a call when the handset is removed from its base when Auto Talk is 

ON

. This is

the default setting. If Auto talk is 

OFF

, press the 

 button to answer any calls.

Change backlight timer — 

Choose between 10, 20, 30 or 40 seconds

until the backlight timer switches off.

Service Center

36

m

m

e

en

nu

u

  o

o

p

pt

tiio

on

ns

s

 - C

 - C

o

or

rd

dlle

es

ss

s

  p

p

h

ho

on

ne

e

Summary of Contents for PowerTel 720 Assure + Twin





























































Reviews: