1. Introduction
Thank you for choosing Champion S-33 centrifuge from Ample Scientific.
Champion S-33 features:
Durable and sophisticated design
Temperature controlled motor to extend centrifuge life
expectancy
Temperature controlled inner chamber through vortex
ventilation system providing stable centrifuging environment
Stainless steel inner chamber
Ultra smooth acceleration curve
2. Product Structure
3. Installation and Setup
1.
Inspect the centrifuge for any damages. Contact distributor for
questions regarding damages.
2.
Place centrifuge on steady and leveled surface. The area should be
well ventilated, and the centrifuge should be kept at least 300mm
away from surrounding objects in all directions. S-33 is for indoor
use only.
3.
Open the centrifuge lid:
a.
Connect centrifuge to power source and turn on power
switch from the back of the centrifuge. When panel lights
up, press [Off] for the lid to automatically unlock. Listen for
the ‘click’ sound before opening the lid. If the centrifuge
does not unlock, proceed to [b.].
b.
Using the provided screw driver, insert into small opening
on the right side of the centrifuge just below the lid;
maneuver until a ‘click’ is heard and the lid is unlocked.
4.
Remove packaging material in the inner chamber
5.
Place buckets into rotor. Place circular rubber inserts into rotor
buckets. Remove any debris or pieces of left over packaging
material from inner chamber.
6.
Close lid and make sure it is locked. Select time for 1 minute. Press
[On] to start operation.
7.
Make sure the whirring sound produced is smooth. If there is
excessive vibration or abnormal sounds, stop the centrifuge
immediately. Make sure rotor is correctly installed and there is no
debris in centrifuge. If vibration and sound persist, please contact
your distributor immediately.
8.
Your centrifuge is now ready to be used.
Figure 1 - Product External Structure
Rotor
Lid
Centrifuge Chamber
Speed Control
and Display
[On] button to start
centrifugation
Timer control
and display
Pg | 2
Manual unlock opening
[Off] button to stop
centrifugation and to
open lid
Power switch is
located in the
back
Pg | 1