NON-USE PERIODS
• When the product is not being used for a long period of time, unplug the
product.
CLEANING
• Unplug the product before cleaning.
• When the system gets dirty, wipe it with a clean, soft cloth. If necessary,
wipe it with a soft cloth, slightly dampened with soapy water. Wipe dry
immediately with a dry cloth.
• Never use benzene, aerosol cleaners, thinner, alcohol or any volatile
cleaning agent.
• Do not use abrasive cleaners, as they may damage the finish.
SERVICE
• Do not open the cabinet of any components. Opening the cabinets may
present a shock hazard, and any modification to this product will void
your warranty.
• Do not attempt to service the unit yourself.
User and Installation Guide
R
User and Installation Guide
R
Step 2
Pairing the receiver with the transmitter
In order to receive audio, the receiver must first be paired with your iFinity audio
transmitter.
Press the pairing button of your iFinity transmitter (please refer to your iFinity
transmitter user manual for further details). The transmitter network status light will
start flashing quickly.
Press the pairing button of your iFinity wireless audio receiver within 5 minutes.
This button is located at the bottom of the receiver (please see picture on next
page). Once the receiver locks to the transmitter signal, the receiver network status
light will light continuously. You now should be able to hear the audio.
You can pair up to 4 wireless receivers with one transmitter. Pair each wireless
receiver as shown above.
Not paired to any transmitter signal
Pairing Mode
Audio is being received
Description of the receiver network status light
Flashing Slowly:
Flashing Quickly:
Always On:
Page 11
ATTENTION!
Do not connect the receiver to passive speakers! Use the Model 480
Wireless Audio amplifier to connect to passive speakers.
Page 4
0
5
25
75
95
100
