User and Installation Guide
R
R
Page 6
Step 3
Step 3
Connecting the receiver
The receiver connects to a line-in interface of an active speaker or external
amplifier via the supplied RCA cable.
If no line-in interface is available, the receiver can also be connected to other
audio inputs by using an appropriate adapter. It should be noted that the
maximum audio level of the receiver output is 1 Vrms (V ± 1.4 V maximum).
pp
Ensure that the connected audio device will accept this audio level.
Connect the DC power input with the supplied AC adapter. The use of a surge
protector is recommended to protect the receiver from power surges which
may damage the receiver or may cause audio dropouts.
For best reception, the receiver should be placed right side up and with the
front of the receiver facing toward the transmitter. The receiver employs a
directional antenna which prefers signals arriving at the front of the receiver.
Example 1:
Receiver placed
on top of a speaker
Example 2:
Receiver mounted
vertically behind a speaker
Transmitter
Receiver
Transmitter
Active
speaker
Receiver
line of sight
indirect connection
(reflected signal)
Active
speaker
