483 mm / 19”
317 mm / 12½”
3U
133.35 mm
5¼”
1
1
Rack mounting
Use four screws and washers to secure the amplifier to the equipment rack rails. Support the weight of the amplifier
while securing it to the rails to avoid bending or distorting the mounting ears. The amplifier may be used in an
equipment rack or as a stand-alone unit. Rack mounting is optional. Screw-mounted rubber feet are provided for
non-rack mount applications.
2
Cooling vents
Amplifier draws cool air from each the side of the amplifier case, with hot air exhausted from the top vents of
the enclosure. To ensure uninterrupted airflow and the lowest possible operating temperature, it is advisable
to leave at least 1U of space on top of the unit. Ultra low noise fans are used to minimize noise. Keep the side
vents clear to allow full air flow
2
4
Front & Side panels
