Temposonics
®
R-Series
V
Analog
Operation Manual
I 56 I
9. The set point units setting can be used to change between
millimeters and inches. Confirm your changes by clicking the
SUBMIT button.
Fig. 76: Adjusting the set point units
10. After the parameters have been configured, click the button
EXIT COMMAND MODE. The “Exit Command Mode” window
for exiting the command mode will open. Click the button SAVE
AND EXIT to exit the command mode and to transfer the changed
parameters to the sensor (Fig. 77). If you click the button
CANCEL, the changed parameters are not transferred to the
sensor. The sensor returns to the normal function and outputs
the current position value. The connection icon on the top right
will turn to green.
Fig. 77: Exiting the command mode
11. If the original factory settings need to be restored to the sensor,
click on “FACTORY RESET” while in the command mode. Like
the command mode entry process, resetting the sensor requires
typing “RESET” into a drop down text box and clicking the
appropriate button.