10
INSERT ARRANgEmENT
CONFIgURATION
DC Coupler inserts arrangement
National standard
Contacts Number &
function
Rated Voltage & Current
function
DC+
750V/1000V 125/250A DC+, connect DC+ and
DC -
750V/1000V 125/250A DC -, connect DC- and battery -
-
PE, connect power supply equipment and vehicle
chassis ground
S+
30V 2A
Charging communicattion CAN_H, connect
charging stake and vehicle's communication
S-
30V 2A
Charging communication CAN_L, connect
charging stake and vehicle's communication
CC1
-
Charging confirmation 1
CC2
-
Charging confirmation 2
A+
30V 20A
Low voltage auxiliary power+, charging stake supply low
voltage auxiliary power+ to electric vehicle
A -
30V 20A
Low voltage auxiliary power-, charging stake supply low
voltage auxiliary power- to electric vehicle
Remarks:
Charging stake and vehicle control device should mount CAN fieldbus termination resistor, 120Ω
recommended. Communication wire should use shielded twist wire, charging stake end with shielded
ground.
VEhIClE CONNECTOR
VEhIClE INlET
Charging communication CAn_H (s+)
Charging communication CAn_H (s-)
Charging confirmation (CC1)
Charging confirmation (CC2)
Low voltage auxiliary power + (A+)
Low voltage auxiliary power - (A-)
E-LOCK Pin 1 (-)
E-LOCK Pin 3 (+)
E-LOCK Pin 2 (signal)
Thermistor (input)
Thermistor (output)