Amphenol BLD7754-PTE, Instruction Manual, Page: 19 / 30

12
INS7750 Rev. A
Protimeter Hygromaster2 Instruction Manual
4.5f Set Brightness
Navigate to
SELECT MODE -> SETTINGS -> BRIGHTNESS
and press
to
set the Brightness level. Use / to navigate between the
different brightness levels (1 to 10) and press to set the desired
brightness. (Brightness level 2 is the default setting.)
4.5g Buzzer On-Off
This option is used to switch the Buzzer
ON/OFF
. When the Buzzer is ON:
•
Any key press will make a beep sound.
•
Instrument turn
ON/OFF
will be indicated
Navigate to
SELECT MODE -> SETTINGS -> BUZZER
and press to
switch the Buzzer on/off.
Use /
to navigate between the on and off options and
press to save the desired configuration.
4.5h Calibration
The Calibration option is unavailable to the user.
4.5i Set Logging Parameters (Optional PC Logging Software
Required)
Navigate to
SELECT MODE -> SETTINGS -> LOGGING -> SETUP
and press
To set the following logging parameters:
•
Start After Mins:
minutes after which logging should start (0 to 999).
•
Log Interval Mins:
sampling interval in minutes (1 to 60).
•
Stop After Mins:
minutes after which logging should stop after
sampling begins (1 to 999).
•
Job Number:
1 to 255