Ampetronic HLS-DM1 Handbook
Page 3
Technical Specifications According to IEC 62489-1
:
2010 Standard
PARAMETER
VALUE
Max area coverage
45m
2
Power supply range
12-24V DC
Fuse
PTC resettable 1.5A
Current consumption (12V DC)
Continuous pink noise
240mA DC
Quiescent
50mA DC
Quiescent (Power Save mode)
14mA DC
Short term peak
1200mA DC
Input 1 (Speaker Line level)
Rated source EMF (sensitivity)
-16dBu
Overload
+22dBu
Input Isolation
1500V
Rated Source Impedance
1.8k
Ω
differential
Input 2 (Unbalaced Mic level)
Rated source EMF (sensitivity)
-55dBu
Overload
-23dBu
Electret Bias Voltage
12V through 11k
Ω
Rated Source Impedance
10k
Ω
Current (into rated load)
Sine 1kHz
>3A
RMS
Pink Noise
>1.5A
RMS
Frequency response (0.6A
RMS
)
100Hz to 5kHz ± 1.5dB
Compliance voltage
4.2V
RMS
Weight
44g
Dimensions
90.5 x 72 x 9mm
Connectors
Clamp Terminals
Environmental
IP00, -30°c to +75°c, <90% relative humidity
Typical heat dissipation
<3W
WARRANTY
This product carries a five year parts and labour warranty from date of shipment from Ampetronic.
To qualify for the five year warranty, the product must be registered at www.ampetronic.co
(products/warranty), without which the warranty will be valid for two years only.
The warranty could be invalidated if the instructions in this handbook are not followed correctly, or
if the unit is misused in any way.
DECLARATION OF CONFORMITY
Manufacturer:
Ampetronic Ltd.
Unit 2, Trentside Business Village, Farndon Road, Newark, Nottinghamshire,
NG24 4XB, United Kingdom.
Declares that the product:
Description:
Induction Loop Driver
Type name:
HLS-DM1
Conforms to the following Directive(s) and Norm(s):
Directive
2004/108/EC
EMC:
EN55103-1 : 2009+A1:2012 Emission (E1-5)
EN55103-2 : 2009 Immunity (E1-5)
Directive
2006/95/EC
Safety:
EN60065 : 2014
Directive
2011/65/EU RoHS
Date:
March 2016
J.R. Pieters
Managing Director, Ampetronic Ltd.
