Amperes ZS5121 Instruction Manual Download Page 8

Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of Amperes
Electronics Service Centres may be asked for by the purchaser or send directly to Amperes
Electronics Sdn Bhd or its authorized master distributor,  Amperes Global Marketing. This warranty is 
not valid if repairs are performed by unauthorized personnel or service centres.

This warranty covers only repairs and replacement of defective parts ; cost and risks of 
transportation as well as removal and installation of the product from the main system are for the 
account of the purchaser. This warranty shall not extend to the replacement of the unit.

This warranty does not cover damages caused by misuse, neglect, accident of the product as well as 
using the product with power supply voltage other than shown on the product, or any other power
supply source / adaptor not recommended by the manufacturer.

This warranty does not cover damages caused by fire, earthquakes, floods. lightning and every cause
not directly related to the unit.

This warranty does not include any indemnity in favor of the purchaser or the dealer for the period
out of use of the unit; moreover the warranty does not cover any damages which may be caused to
people and things when using the product.

This warranty certificate is valid only for the described product, and is not valid if modifications are
made on this certificate or on the identification label applied on the product.

This warranty covers all the material and manufacturing defects and is valid for a period of 12 
months from the date of purchase or for a longer period in countries where this is stated by a 
national law. In this case, the extension is valid only in the country where the product is purchased.

Amperes Electronics Sdn Bhd is not obliged to modify previously manufactured products under 
warranty if the design changes or improvements are made.

WARRANTY CONDITIONS

DISCLAIMER

Information contained in this manual is subject to change without prior notice and does not 
represent a commitment on the part of the vendor. AMPERES ELECTRONICS SDN BHD  shall not be
liable for any loss or damages whatsoever arising from the use of information or any error contained
in this manual.

It is recommended that all services and repairs on this product be carried out by AMPERES 
ELECTRONICS SDN BHD or its authorized service agents.

AMPERES series must only be used for the purpose they were intended by the manufacturer and in 
conjunction with this operating manual.

AMPERES ELECTRONICS SDN BHD cannot accept any liability whatsoever for any loss or damages 
caused by service, maintenance or repair by unauthorized personnel, or by use other than that
intended by the manufacturer.

Made In Malaysia

By    AMPERES ELECTRONICS
         www.ampereselectronics.com

Updated May 2010

Summary of Contents for ZS5121









Reviews: