Setting Up ( Con’t )
Page 8
Amperes PT1800
Up to 250 memories can be stored in the unit. Select the Main Menu 2.0 to program the times as shown.
2.0 PRO. SCHEDULE
SETTING
2.0 PROGRAMMING TRIGGERING TIMES
- Use NEXT/PREV button to adjust the memory location. ie. 001
- Press ENTER to confirm and the cursor shall move to Channel location
number
Example : It is required to program memory location 1, to trigger channel 8 at
1. 30 pm every day except Saturday and Sunday. Triggering mode shall be
momentary relay contact.
Enter
2.1 Sche 000 / 250
CH.0 ( Skip )
- Use NEXT/PREV button to adjust the output channel. ie. 8.
- Press ENTER to confirm and the cursor shall move to triggering mode
selection
Enter
2.1 Sche 001 / 250
CH.0 ( Skip )
- Use NEXT/PREV button to adjust the triggering mode ; set to Pulse ( 3 secs )
- Press ENTER to confirm and the menu shall forward to Time Setting
Enter
2.1 Sche 001 / 250
CH.0 ( Skip )
Time Setting Sub Menu
Enter
2.2 S002, C8, Pulse
Time Setting
- Use NEXT/PREV button to adjust the hour, ie 13 (24 hr format) and press
ENTER.
- Repeat the step above for minute and press ENTER.
Enter
2.2 S002, C8, Pulse
Time 00h;38m;00
- Seconds setting can be skipped by pressing ENTER.
- Upon completion, press ENTER again and the next sub menu shall appear as
below ;
Enter
2.2 S002, C8, Pulse
Time 13h;30m;00
Day of Week ( DOW ) Sub Menu
Enter
2.2 S002, C8, Pulse
DOW Setting
- Use NEXT/PREV button to select the day, ie. Mon to Fri at each cursor
- Unused location 6,7 can be left as 0 as shown below. Press ENTER to set the
day
Enter
2.2 S002, C8, Pulse
DOW M,T,W,T,F,S,S
- Press ENTER at the last location to jump to next Sub Menu, as shown in the
next pg.
Enter
2.2 S002, C8, Pulse
DOW M,T,W,T,F,S,S
Save and Exit Sub Menu
Enter
2.2 S002, C8, Pulse
Save and Exit
- Use NEXT/PREV button to toggle between saving and discarding the setup.
- Press ENTER and return to 2.0
- Repeat the steps shown for other time setting.
Enter
2.2 S002, C8, Pulse
Save. Yes
M = ON M = OFF
__
