background image

PAGE 2

PARTS IDENTIFICATIONS

1.  GOOSENECK MICROPHONE

The illuminated gooseneck microphone can be detached from the console for safekeeping. Its 

cardioid  back  electret  capsule  is  sensitive  to  front  voice  pick  up  and  reject  rear  unwanted 

noise.

2.  ZONE SELECT SWITCHES

12  individual  zone  selection  switches  are  available  for  PM1120  and  6  for  PM1060.  LED 

indicator is provided for active zone.

3.  ALL CALL SWITCH

ALL  CALL  switch  shall  activate  all  zones  with  single  press.    Please  note  that  a ALL  CALL 

signal is transmitted at the D connector.

4.  CHIME / TALK SWITCH

Pressing  this  switch  shall  send  signal  for  zones  activated  and  followed  by  4  tone  upward 

chime. Blinking LED indicates that the chime is being transmitted and still LED is to alert the 

user that the microphone is ready for announcement.

Pressing  momentary  the  switch  shall  deactivate  the  console  in  which  a  4  tone  downward 

chime shall be broadcasted before shutting down the zone selection.

5.  DATA CONNECTOR

The 15 pin D connector is used to send signal for zone selection, power supply and override 

signal. 

D male connector is supplied with every unit of PM series of microphones.

6. MICROPHONE LEVEL CONTROL

It is used to adjust the level of microphone gain.

7.  CHIME LEVEL CONTROL

It is used to adjust the level of chime signal.

8.  OUTPUT JACK

The output signal is balanced at 0 dB max, connection using stereo 1/4" phone jack.

Summary of Contents for PM 1060









Reviews: