Operating The Unit
PD1900 | TOUCH SCREEN PAGING MICROPHONE
PAGE 13
A complete installation shall consist of the Mic, Zone Selector and Mixer / Amplifier. Initial setup such as priority level should be
set. ( if more than one PD1900 is installed )
PD1900 can be linked to TD6240 for zone decoding, or used in MatriMix MxP2288 for matrix installations.
Follow the simple steps below to begin paging.
1. DIRECT ZONE PAGING
Direct zone paging is when the user select the
required zone and press CHIME + TALK
button.
A chime shall be broadcasted followed by
illuminated ring at the gooseneck mic.
To end paging, simply press the CHIME + TALK
button again which would be followed by a
downward chime.
Example :
Performing a paging to zone 1
and 15.
Press button “1”
Press button “ADD”
Press button “1” and “5”
Press “CHIME + TALK”
Talk when the LED ring at the mic is
lit and to end, press
“CHIME + TALK”
2. ALL CALL PAGING
To make an ALL CALL paging, press the “ALL
CALL” button, without having to press “CHIME
+ TALK ” button.
Paging mic is ready for announcement once
the LED ring is lit.
To end paging, press the “ALL CALL” button
again.
In ALL CALL paging, all normal zones shall be
activated. This is however, would not energise
24V DC overriding supply to override volume
controllers. To enable overriding, we recom-
mend the usage of EP1200.
Example :
Making call to all normal zones (
not overriding external volume
controllers )
Press “ALL CALL”
Talk when the LED ring at the mic is
lit and to end, press
“ALL CALL”
