PAGE 5
External paging desk ( eg. Amperes PM1000 ) can be connected to the unit either at mic or line input phone jack,
using 1/4” stereo phone jack.
The diagram below illustrates the connection of Amperes PM1000 paging desk with zone selection :
AMPERES PM1000 PAGING DESK
FRONT OF MC2112
Input to channel 2
Switch off phantom power
phone jack
Select
output
level either to mic
in
correspon-
dence to input
jack of the mixer
amplifier
REAR OF MC2112
RCA jack
AM / FM tuner / CD player
or any other music source with
line output
Though inputs to the mixer amplifier are in
stereo mode, the output shall only be avail-
able in mono.
Single connections of RCA jack is allowed but
if the music output from player is in stereo
mode, it is advisable to connect both L and R
to the mixer amplifer.
PHONE JACK
TIP : +VE / HOT SIGNAL
RING : -VE / COLD
SLEEVE : GROUND / SCREEN
REC
LINE OUT
CH2
CH3
CH4
CH5
CH6
CH2
PHANTOM
POWER
MIC
MIC
LINE
LINE
LINE
MIC
MIC
REC
LINE OUT
CH2
CH3
CH4
CH5
CH6
CH2
PHANTOM
POWER
MIC
MIC
LINE
LINE
LINE
MIC
MIC
MIC 1
Input 4 can be either mic
or line level. Select the
type by using this switch.
Balanced signal pin configuration of phone jack.
mic
Connecting Paging Microphone
Connecting BGM Sources
