background image

Parts Identification

2

PAGE 2

iPX5155 | ETHERNET BGM / PAGING CLIENT

3

6

7

1

Front View

Rear View

9

10

5

4

8

POWER - This blue LED shall lit when iPX5155 is powered On.

SERVER - This green LED shall lit when iPX5155 successfully establish a connection with Paging Server (iPX5101).

STATUS - Blink whenever there is a network activity ongoing.

STREAMING - Blink whenever iPX5155 is transmitting / receiving streaming audio to / from another paging client or music server

1.  INDICATOR LEDS

24V DC power supply input.

2.  POWER PORT

Ethernet port for connecting to network switch.

3.  ETHERNET PORT

Button to allow iPX5155 enters Bootloader mode or reset settings to factory default settings. 
Bootloader  mode:  To  enter  this  mode,  hold  the  reset  button  until  POWER,  SERVER  and  STATUS  LEDs  lit.  Enter  this      
mode to do firmware updating if normal mode updating does not work. All iPX5155 settings remain intact in this mode.
Reset  to  factory  default  settings:  Hold  the  reset  button  until  POWER,  SERVER,  STATUS  and  STREAMING  LEDs  lit 
will reset all iPX5155 settings to factory default settings.

4.  RESET BUTTON

This  port  provides  a  dry  contact  which  can  be  used  to  connect  E/M  overriding  signal  or  activate  ALL  CALL  at    

speaker zone selector.

5.  RELAY CONTACT

We can activate iPX5155 paging using voltage free dry contact. Connecting PM series paging mic / MR1301 message recorder / 
TI6100 Telephone Interface dry contact to this port will activate iPX5155 and have their analog audio signal stream to the network. 
This port only work when iPX5155 operates in Input mode. (refer page 7) 

6.  REMOTE TRIGGER PORT

For data transmission (RS485) among iPX5155, PD paging mic and zone decoder like TD6240 / TD6400 / TD6080. 

7.  RS485 PORT

This LED shall blink according to the rhythm of the input paging mic audio.

8.  SIGNAL INDICATOR

Connect paging mic or other audio source analog audio signal to this port. The signal shall be in balanced line level.

9.  AUDIO INPUT PORT

iPX5155 broadcast analog audio signal via this port to mixer or amplifier. The signal is in balanced line level.

10. AUDIO OUTPUT PORT

Summary of Contents for iPX5155













Reviews: