Ampere Shower Power, Manual

Page: 10 / 24

Shower Power is not bidirectional so it is critical to
determine which side of Shower Power is input and
which side is output. There is a sticker that indicates
the input side (this can be removed after the first
use). For additional confirmation and future checks,
the hole on the input side is smaller. As such, the turbine
will be more visible on the output side. In addition,
there is a small metal sensor on the output side.
Rain and Fixed
For these shower types, the male-male connector
will go on the output side (the side that connects to
the showerhead). First, screw in the male-male
connector by hand and then tighten it with the hex
key.
Handheld
For these shower types, the male-male connector
will go on the input side (the side that connects to
the hose). First, screw in the male-male connector
by hand and then tighten it with the hex key.
Step 4 - Connecting your showerhead to the
shower dock
Attach your showerhead to the shower dock.
Connect securely but don’t overtighten. If you
noticed that your showerhead/fitting already
used sealing tape, you may want to use it at this
stage of the installation process.