At its core, HyperCube is a charging station. With three wireless charging panels
and a USB-C output port, HyperCube can charge up to four devices at the same
time. The wireless charging panels charge automatically on contact so simply plug
in HyperCube and set any wireless charging device on the panel to begin charging.
There are no buttons or switches to press and, because it has a low standby
current, feel free to leave it plugged in all day and night.
Charging with HyperCube
10W Fast Charging Panels - All three HyperCube panels supply charge at up to 10W
for a total of 30W of wireless charging power.
Low Standby Current - When there are no devices on the wireless charging panel
or the device(s) are fully charged then the power output will be less than 0.3W per
panel.
Overcharging Protection - Once your device nears a full charge, the current will
automatically reduce to a “trickle”. HyperCube will continue to provide a small
amount of current to maintain a full charge without damaging the device or
charger.
Foreign Object Detection - HyperCube will detect whether an object is a compatible
device or something else and only charge when the object is wireless charging
compatible.
Low Heat and Overheating Detection - All charging will create some heat (whether
wired or wireless). HyperCube has been developed to maintain a safe charging
temperature. If Hypercube should get too hot, our advanced chipsets will
automatically shut off the charger.
LED Indicator Lights - The LED lights on each panel indicates the status of
each individual pad. If the LED light is illuminated blue, then the device is
charging properly
If the LED light is flashing red, then the device is not charging (because a
foreign object was detected)
Wireless charging
Plus/Minus
Button
Light
Alarm
Sound
Alarm
Alarm
Sound
Button
Sleep
Sounds
Sleep
Timer Snooze
Switch Light
Button
Light Button
Sound Alarm
Indicator Light
Light Alarm
Indicator Light
