Amped Wireless
A Division of Newo Corporation
Copyright © 2017 Amped Wireless / Newo Corporation. All rights reserved.
Amped Wireless, Newo Corporation, Amped Wireless Logo are registered trademarks or trademarks of Newo Corporation.
v062917
If you continue to have issues setting up the Range Extender, give us a call — we’re here to help: 888-573-8820
Visit our website for more support information and answers to frequently asked questions: www.ampedwireless.com/support
Access the taskbar on the bottom right of your
screen, tap on the Wi-Fi icon, enable Wi-Fi, and select
Amped_B750EX_2.4
or
Amped_B750EX_5.0
.
Click on the Wireless icon to see available wireless
networks. Select the
Amped_B750EX_2.4
or
Amped_B750EX_5.0
ne
twork.
Tap on your Settings icon, select Wi-Fi, and choose
the
Amped_B750EX_2.4
or
Amped_B750EX_5.0
network.
iPhone
Amped_B750EX
Windows 10
Mac OS X
How to Connect to the Range Extender
Tips: Power Outages, Rebooting Routers & Channel Changes
Wireless routers operate on specific wireless channels to avoid interference with neighboring networks. Some
wireless routers are set to automatically scan for the best wireless channel. A power outage or a simple reboot may
cause your home wireless router to change its wireless channel, causing the Range Extender to disconnect from
your home network.
After a minute or two the Range Extender will automatically reconnect to your Home
Network with the new settings.
However, if for whatever reason it does not, simply log onto the Range Extender’s
web menu by opening your web browser and accessing http://setup.ampedwireless.com. If the page does not load,
try resetting the Range Extender by holding down the Reset button for ten seconds. After the Range Extender has
rebooted, open your web browser and try again.
When the web menu appears, run through the Wizard again to reconfigure the connection to your Home Network.
To prevent the channel changing issue from occurring in the future, you may log onto your router’s web menu and set
the wireless channel from Automatic to a static channel number. You will need to reconfigure the Range Extender
with the new channel. If you are not sure how to access your router’s web menu, contact the support department for
the brand of your wireless router.
Using the Features on your Range Extender
If you are unfamiliar or want more information on how to enable BoostBand
™
Technology or the security features
on the Range Extender, please visit the website: http://support.ampedwireless.com/b750ex
The Range Extender is equipped with many powerful features like BoostBand
™
Technology and
advanced security features, all of which can be accessed through the web menu:
12:26
Technology
Increase the overall speed and performance of your extended
network by streamlining dual band network traffic through a single
Wi-Fi frequency band between the Router and the Range Extender.
Menu Location: More Settings > BoostBand Technology
Wireless Access Scheduling
Control when your Wi-Fi is on/off.
Menu Location: More Settings > 2.4 or 5GHz Wi-Fi Settings > Access Schedule
User Access Control
Restrict network access to specific users.
Menu Location: More Settings > 2.4 or 5GHz Wi-Fi Settings > User Access
Wireless Coverage Control
Adjust the distance of your wireless network.
Menu Location: More Settings > 2.4 or 5GHz Wi-Fi Settings > Wireless Coverage
Web Menu (Left Side)
Amped_B750EX
This is the second page of the Setup Guide. Start on the opposite side first.
Amped_B750EX
Autoloading Web Menu
When the Range Extender loses its connection with your Home Network, the Web Menu will automatically load on
your web browser. All web address entries will be redirected to the Wizard of the Range Extender. This feature is
meant for you to easily reconfigure your Range Extender in the event of a disconnection. This feature may be disabled
in the IP Settings menu of the web menu. The feature is titled: Auto-DNS.
Additional Range Extender Features
Swipe in from the right edge to access the charms
bar, tap on Settings, select the Wi-Fi icon, and select
the
Amped_B750EX_2.4
or
Amped_B750EX_5.0
.
Windows 8
A. Press the "Home" button to get to the homepage.
B. Tap the "Settings" app icon.
C. Tap on Wi-Fi to enter the iPad’s Wi-Fi settings.
D. Toggle the Wi-Fi "On/Off" selector switch to "On".
E. Under "Choose a Network...", select:
Amped_B750EX_2.4
or
Amped_B750EX_5.0
.
iPad Tablet
Amped_B750EX
A. Tap the "Apps" menu on the tablet screen.
B. Locate and tap the "Settings" app icon.
C. Under "Wireless & networks," tap "Wi-Fi settings".
D. Tap the Wi-Fi box to turn on Wi-Fi and scan.
E. Under "Wi-Fi networks", select:
Amped_B750EX_2.4
or
Amped_B750EX_5.0
.
Android Tablet
Amped_B750EX
Setting a Login and Password for the Web Menu
This login/password is NOT the wireless security key used to connect to your wireless network.
For added security, you may want to set a login and password
to access the Web Menu. To do this, go to
More Settings >
Management > Password
on the left side of the web menu.
If you forget your login/password, you will need to reset the Range
Extender back to default settings in order to access the web menu again.
To reset the Extender, hold the Reset button of the Range Extender for 10 seconds.
Setting the Range Extender’s System Clock
In order for your Access Schedules and logs to perform using
the correct time stamps and schedules, you will need to set your
System Clock. To do so, go under
Management
access the
System Clock
tab to sync the System Clock with your computer's
time or to sync with the Internet.
Connecting to the 5GHz network requires that you have a 5GHz capable network adapter.
Troubleshooting Tips
I entered http://setup.ampedwireless.com and it failed to open the Web Menu.
a. Make sure your computer is connected to the Range Extender’s Wi-Fi network: "Amped_B750EX_2.4" or
"Amped_B750EX_5.0".
b. Try to use a different web browser. We recommend the Google Chrome web browser.
c. Try to open your web browser to the default IP address by putting this number into your web browser instead:
192.168.1.240
d. Power off (unplug) the Range Extender and power it back on. Try again.
e. Reset your Range Extender to default settings by holding the Reset Button (located on the front panel) for
ten (10) seconds and try again.
f. If steps (a) through (e) fail, disconnect your PC from all Wi-Fi networks. Attach an Ethernet cable between
the Range Extender and your PC. Try to access http://setup.ampedwireless.com again.
My Range Extender was working fine previously, but now I can no longer access the Internet through it.
a. The connection to your Home Network may have been dropped or the router settings may have changed.
Changes to the router could be a result of several events, such as a power outage. When this occurs, connect
to the Range Extender and access the setup menu using the web address: http://setup.ampedwireless.com
Run the Wizard to reconnect the Range Extender to your network.
b. Using the setup menu (setup.ampedwireless.com) check to see that the signal strength between the Range
Extender and your Home Network is above 70%. The Range Extender may be too far from your router and not
maintaining a signal strength above 70%. Check the signal strength between the router and the Range
Extender through the web menu (left side): More Settings > Management > Device Status. The Signal Strength
readout will be under the Home Wireless Network Settings section. This Signal Strength must be above 70%.
If it is below, move the Range Extender closer to your router, or reposition the Range Extender.
I cannot find my Home Network when scanning for wireless networks in the web menu Scan page.
a. The Range Extender may be out of range. Move the Range Extender closer towards the wireless router and
try the Setup Wizard again from the web menu.
b. Make sure that your Home Network’s wireless SSID is broadcasting and not hidden. Hidden SSIDs will require
that you manually enter the SSID into the Wireless Settings > Home Network menu.
I have a dual band router and I cannot repeat a network (or both networks).
a. The Range Extender will repeat the 2.4GHz and 5.0GHz signal from your router simultaneously.
To ensure a reliable and strong connection for both wireless networks, make sure that both 2.4GHz and
5.0GHz wireless networks have a signal strength above 70%. If necessary, reposition the Range Extender
closer to the dual band router to help further maintain a strong connection.
b. Check to make sure that you have the correct security key for both the 2.4GHz and 5.0GHz network of your
dual band router. These keys may sometimes be different from each other.
c. Ensure that your dual band router does not have any security features enabled, such as MAC address filtering,
which may be blocking the connection. If features are enabled, please disable them and run the Wizard again.
I have extended my home network, but my Wi-Fi speeds seem slow or not at 802.11ac rates.
a. To achieve 802.11ac Wi-Fi speeds for your extended network, it is necessary to extend an 802.11ac Wi-Fi router.
Your extended network can only be as fast as the network it is extending.
b. Check that your computer's network adapter is an 802.11ac capable network adapter. Your computer's network
connection can only be as fast as your network adapter's speed capabilities.
c. Using the setup menu (setup.ampedwireless.com) check to see that the signal strength between the Range
Extender and your Home Network is above 70%. If it is below, move the Range Extender closer to your router,
or reposition the Range Extender.
d. Check that the antenna is fastened tightly to the antenna port.
The Signal Strength LED on the top of the Range Extender is not on.
a. Please check that the Range Extender is connected to a Home Network or router. The Signal Strength LED will
not be on if there is no connection to a Home Network.
b. The connection to your Home Network may have disconnected. Please check your connection by accessing the
web menu dashboard and reconfigure, if necessary.
PROBLEM:
SOLUTIONS:
PROBLEM:
SOLUTIONS:
PROBLEM:
SOLUTIONS:
PROBLEM:
SOLUTIONS:
PROBLEM:
SOLUTIONS:
Amped_B750EX
Network01
Network02
Wired Port
WPS /
Reset Button
Wi-Fi Protected Setup
(One-Touch Setup or Push Button Configuration)
•
I
f your wireless adapter has WPS one-touch setup you can use it when connecting to the Range
Extender. Press the WPS/Reset button on the Range Extender once, do not hold it down. The WPS
LED will begin to blink. As it blinks, push the WPS button on your wireless adapter or enable WPS with
the provided software for your wireless adapter.
Reset the Range Extender to Default Settings
1
2
Access the Reset button through the web menu on the left side under
More Settings > Management >
Save/Reload Settings
. Select the
Reset Settings to Default
.
Access the physical WPS/Reset button on the front panel of the Range Extender:
Hold down the Reset button for at least ten (10) seconds. Release when the power LED begins to blink.
There are two options to reset the Range Extender back to factory default settings:
