Introduction/Warranty
Ampco Pumps Company
Page 3
Introduction
To ensure the best results and service, please read and fully understand this manual prior to
putting the unit into service. For any questions regarding operation or maintenance please
contact your local distributor or Ampco Pumps Company:
Ampco Pumps Company
2045 W. Mill Road
Glendale, WI 53209
Phone: (800) 737-8671 or (414) 643-1852
Fax: (414) 643-4452
Email: [email protected]
General Information
Powder is introduced through the inner tube while the liquid flows through the outer tube
to the mixing chamber. Because the liquid enters the chamber in the same direction as
the impeller rotation, the flow is accelerated with minimal splashing. An inner screen
creates back pressure, moving the liquid down and creating a natural suction into which
the dry ingredient is introduced by opening the butterfly valve.
AC+ Dry Blenders are also suitable for liquid to liquid applications.
Shipping Damage or Loss
Upon receiving equipment that is damaged or if your shipment is lost in transit, immediately file
a claim with the carrier. At time of pick-up, the carrier signed the bill of lading, acknowledging
that they have received the product from Ampco in good condition.
Pump Receiving
When applicable, Ampco covers the pump inlet and discharge ports prior to shipping, ensuring
that foreign matter does not enter the pump during shipment. If the protective covers are
missing upon arrival, remove the pump cover and inspect to ensure it is free from contaminate
before turning the shafts. Please make note of the serial number; this will assist in the process
of ordering replacement parts and/or a warranty claim. For more information regarding
shipment damage or warranty, please refer to the Introduction/Warranty section in this manual.
Ampco Pumps Company AC+ Dry Blender Manual M-028 Rev C 12.20
