WDMA-612AN User Manual
11
7. Troubleshooting
No Image Displayed on screen:
Are the TX and RX units plugged in and
on?
Is the correct INP being used (press the
button and test it)
Is the TV on the correct input for the RX
unit? (cycle between TV inputs)
Is the "Link" light illuminated (carefully
reset if not)
Unit will not Link:
There is a finite range for the device,
and it varies depending on interference.
Move the TX and RX units closer
together, turn the units off, wait 25 sec,
then power them back on. This should
get the link.
No Power light:
Make certain the TX and RX units are
plugged in as shown in the diagram.
Check your power strip or wall socket to
make sure there is power, do other
devices power in that socket or on that
power strip? Turn off and turn on the
power. Make sure the switch is fully
depressed.
