Proprietary & Confidential Information
Doc. NO:
5
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Label requirements (Module)
If the identification number is not visible when the module is installed inside another device, then the outside of the
device into which the module is installed must also display a label referring to the enclosed module, Contains FCC ID:
ZQ6-AP6398XU, Contains ISED ID: 11956A-AP6398XU.
Other
Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the
multi-transmitter procedures.
The host integrator must follow the integration instructions provided in this document and ensure that the
composite-system end product complies with the requirements by a technical assessment or evaluation to the rules and
to KDB Publication 996369.
The host integrator installing this module into their product must ensure that the final composite product complies with
the requirements by a technical assessment or evaluation to the rules, including the transmitter operation and should
refer to guidance in KDB 996369.
NCC Statement:
低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自
變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象
時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工
業、科學及醫療用電波輻射性電機設備之干擾。
此模組於取得認證後將依規定於模組本體標示審驗合格標籤，並要求平台廠商於平台上標
示本產品內含發射器模組
