Ampac Orbis, Product Manual, Page: 3 / 22

1
MAN1509-4
ORBIS AUSTRALIAN PRODUCT GUIDE
1 About This Manual
1.1 Introduction
Orbis is a range of conventional detectors which has been developed and tested to create
advantages for fire engineers and installers, as well as owners and users of buildings.
1.2 Advantages for the Engineer:
Environmental flexibility: Orbis has a voltage range of 8.5 to 33V, an operating temperature of
–40°C
to +70°C and a tolerance of 98% relative humidity.
Unrestricted choice of panel as polarity reversal for 200mS will not affect detectors.
Ease of commissioning with StartUp . Detectors flash (red 1x/sec) to show correct installation
—
detectors revert to normal operation automatically after 4 minutes.
Efficient maintenance procedure with FasTest®. FasTest takes just four seconds to test and confirm
that smoke and heat detectors are functioning correctly.
1.3 Advantages for the Installer:
Fast and easy base installation with the TimeSaver® Base : fit screws to mounting box or surface,
place the base over the screws and slide into place using the E-Z Fit slots, then tighten the screws.
Fast cable termination: the base has an open working area, single quadrant terminals, captive
screws, a guide to cable stripping and detector LED alignment.
Simplified stockholding. The Orbis base is compatible with existing mounting boxes and back plates.
Ease of testing with the Continuity Link which enables voltage testing of zone wiring prior to
commissioning.
1.4 Advantages for the Owner:
Visually pleasing, harmonious design.
Orbis has entirely new styling and combines a modern look and enhanced ease of use.
Factory-set performance maintained with
DirtAlert™:
A yellow flashing LED indicates that the drift
compensation level has been reached.
Contamination unlikely anyway with the DustDefy system which prevents dust ingress while
maintaining airflow.
False alarms are reduced with Transient Rejection which filters out transient high readings that might
otherwise cause a false alarm.
Orbis is an entirely new range with modern styling and a completely revised mounting base. It is
electrically compatible with Series 60 and Series 65 ranges of conventional detector.
Orbis is a demonstration of a commitment to the market for high quality conventional detectors for
use in small to medium size installations. Development of this range has put ease of installation and
reliability in daily operation at the forefront of considerations. The attractive and compact design
means that Orbis will blend in well with all architectural styles.