FireFinder
Liquid Crystal Display Repeater
4
2.3 The Main Menu
Figure 4: The Main Menu
Press the forward, back, up or down keys to navigate the cursor or highlighted selection to the required
menu. In the MENU the user can view;
0
FIRE ALARMS:
1
PRE-ALARMS:
2
SYSTEM STATUS:
Press Menu to enter the STATUS MENU.
Figure 5: The Status Menu
From the STATUS MENU the status of all of the system components and settings listed below can be
displayed.
3
FAULTS:
Pressing
Menu
brings up a sub-menu from which a more detailed description of
the Defect can be displayed. With a Defect present use the navigation keys to select the required field
then press menu to select the field ( 0 to 4 ).
‹
Zones
Devices
Œ
Loops
•
Modules
Ž
Power
Supply
•
Brigade
‹
Zones Devices:
Display identified zone and device faults
Œ
Loops:
Display identified loop faults
•
Modules:
Display loop and I/O module faults.
Ž
Supply:
This menu item will display the charger voltage, whether or not the power
supply is in fault, if the battery is correctly fitted and if Mains power is present.
•
Brigade:
This displays the fault status of all of the monitored outputs on the Brigade
Board. Eg. Bell, Aux, DSW, Warn, Fault, Alarm, Isol, Bfail, Vmon & Brigade Status.
4
ISOLATES:
Selecting ( pressing Menu ) on the system.
5
PRINTER RESET:
Selecting ( pressing Menu ) resets the printer ( empties the buffer ).
6
RETURN:
Selecting ( pressing Menu ) returns the user to the Default screen
.
MAIN MENU
0: ALARMS
1 :PRE-ALARM
2: SYS- STATUS
3: FAULTS
4: ISOLATES
5: PRINTER RESET
5 :RETURN
SELECT No.
AL:1S ALM: 000
PALM: 000
FLT: 000
ISOL: 000
SYSTEM STATUS
0: ALARMS 0000
1 :PRE-ALARMS 0000
2:ISOLATES 0000
3: DEVICE FAULTS 0000
4: MOD FAULTS 00
5: LOOP FAULTS
VERSION: NZS4512
AL:1S ALM: 000
PALM: 000
FLT: 000
ISOL: 000