•
clean / harmonic ; 2 way switch
the clean setting is pure and clean, very high headroom
the harmonic setting is similar to a valve preamp, turning the guitar up and playing
harder will produce more dynamic overtones. Use the gain control and guitar volume
to get the best of this to suit your taste. High gain settings will produce mild overdrive
on loud notes.
•
master volume
the main volume control
•
reverb depth
set the amount of reverb
•
reverb time
set the reverb time, ( room size / dwell )
•
effects send ; 1/4" mono jack
line level output, taken before the reverb and master volume
can also be used as a line out
•
effects return ; 1/4" mono jack
line level input
•
direct out ; 3 pin male XLR
balanced output, taken after the reverb is added, and before the master volume control
The output level here is affected by the gain control, but not affected by master volume.
Block diagram
