AQS-HSP1-E
Advanced Microwave Products
PO Box 1437
2465 Old Highway 40 West, Suite 200
Verdi, NV 89439
How to Configure Your Amplifier
The HSP1 power amplifier does not require any configuring unless it includes optional dual RF power
output. If included, the power level is set using the yellow wire shown above. To set the amplifier to
the higher output power level, leave the yellow wire open (unconnected). To set the amplifier to the
lower output power level, connect the yellow wire to ground (or chassis). See the product manual for
more details.
Wiring Your HSP1 Power Amplifier
SMA Female
RF Input
SMA Female
RF Output
+11 to 16 VDC Input
Ground
Enable Enable (Open=On, Ground (or <1.5 Vdc)=Off)
High/Low Power (Open=High, Ground (or <0.6 Vdc)=Off)
Red
Black
White
Yellow
Wiring
