AMP HSF1 Quick Start Manual Download

Page: 1 / 2

For Technical Support, Contact AMP

at (775) 345-9933 (9 am - 5 pm PST)

or [email protected]

Connect amplifier RF output SMA connector to antenna

Verify the connected transmitter’s output power is less

than the maximum input power rating (noted on HSF1

chassis) of the HSF1 power amplifier, then connect the RF

output from transmitter to RF input SMA connector.

STEP

Connect power, RF power select (if applicable), and

enable inputs to the Hirose DF13 connector *see

reverse side

STEP

Note

When setting up your system, the transmit and receive

antennas should be greater than 25 feet apart to

prevent serious damage to or destruction of the

receiver’s front end

HSF1 Power Amplifier Quick Start Guide

Summary of Contents for HSF1

Page 1: ...1 chassis of the HSF1 power amplifier then connect the RF output from transmitter to RF input SMA connector STEP STEP Connect power RF power select if applicable and enable inputs to the Hirose DF13 c...

Page 2: ...t to the desired output level If the HSF1 power amplifier is commanded to a power level with which the unit is not equipped the unit will default to standby disabled until a valid power level command...

Brands by name