AMP 90188-2 Instruction Sheet Download Page 4

Page: 4 / 4

408–7270

Hand Crimping Tool 90188–2

Rev C

4 of 4

63.5

[2.50]

(Closed)

288.93

[11.375]

19.1 [.75]

Weight: Approximately 567 g [1 lb. 4 oz.]

90188–2

REPLACEMENT PARTS

ITEM

PART NUMBER

DESCRIPTION

QTY PER ASSY

1
2

21045–3
21045–9

RING, Retaining
RING, Retaining

4
2

Figure 5

6. REVISION SUMMARY

The following changes were made since the previous
release of this sheet:

Per EC 0990–1016–99:

Changed tool repair service information in
Section 5, REPLACEMENT AND REPAIR

Updated document format

Summary of Contents for 90188-2

Page 1: ...CERTI CRIMP ratchet The locator insulation stop positions the terminal between the crimping dies and aids in locating the wire in the terminal In use it rests in the terminal s locator slot The CERTI...

Page 2: ...her contaminants with a clean brush or a soft lint free cloth Do NOT use objects that could damage the tool 2 Make certain that the retaining pins are in place and that they are secured with retaining...

Page 3: ...RIMP ratchet feature on the hand tool should be checked to ensure it does not release prematurely allowing the crimping dies to open before they have fully bottomed Obtain a 0 025 mm 001 in shim that...

Page 4: ...EPLACEMENT PARTS ITEM PART NUMBER DESCRIPTION QTY PER ASSY 1 2 21045 3 21045 9 RING Retaining RING Retaining 4 2 Figure 5 6 REVISION SUMMARY The following changes were made since the previous release...