USB Port
LED Indicator
RS-232 Port
LAN Port
Paper holder Lid
LCD display
Keypad
User smart card slot
Magnetic stripe card
Rubber pad
Tag Label
Back cover
Power Port
Top Antenna
inductive zone
handle
Stylus pen
Lanyard hole
Examining terminal features before starting the installation
DQ-7000-1-E
AMP 7 Series Countertop / Mobile Terminal Quick Reference Guide
Advanced Mobile Payment Inc.
Description
Paper holder lid: Container for thermal paper roll ( Φ38X57mm)
Handle: Pull handle to open the paper holder lid
LCD display: 2.8 inch and 320*240 TFT LCD. Optional signature capture function.
Antenna inductive zone: The zone for tapping contactless card
Key pad: 10 alphanumeric keys, 8 functional keys, 1 power switch key.
User smart card slot: Supporting EMV card with contact surface facing up.
Magnetic Card Reader: ISO7812, 1/2 Tracks or 2/3 Tracks or 1/2/3 Tracks, bi-directional
swiping with the magnetic stripe facing LCD.
Rubber pad: Four pads, anti-vibration/non-slip.
Tag label: Showing model name, rated device parameter.
Back cover: Remove the cover to install battery or SIM/UIM/SAM card.
Power port: Approved power supply for AMP 7 Series
RS-232 port: 1 RS-232(up to 2), output: 5VDC, 500mA.
LAN port: An communication LAN Port for updating software.
Lanyard hole: Slide lanyard through and make a loop on the outside.
DQ-7000-1-E
AMP 7 Series Countertop / Mobile Terminal Quick Reference Guide
Advanced Mobile Payment Inc.
LED indicator: Power status indicator of device
USB Port: USB communication interface
Battery installation (if supplied)
Place the terminal face down and remove the battery cover.
Fit the battery inside the battery compartment and plug its cable.
If a SIM or SAM is required and is not already inserted, insert a SIM/SAM in to
the socket marked as SIM or SAM.
RS-232
LAN
POWER
SIM/SAM
Installation
