www.amp-research.com
7/12
IM75101 rev 01.31.18
A M P R E S E A R C H P O W E R S T E P
T M
– D O D G E R A M
15
13
14
12
Attach 11” cable ties loosely around
harness.
Attach wire harness to the control box.
Slide controller through cable ties. Line up
cable ties with grooves in controller and
tighten.
15
8
7
Remove fuse from Power Step wire harness.
+
7
7
14
14
Route long leg of wire harness to passenger side across fire wall. Secure with tie wraps.
7
_
+
GROUND
Attach power leads, red lead to positive
battery terminal and the black lead to body
ground as shown.
8
Note: Make sure controller connector
locking tabs fully engage.
