[email protected] • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
4
5
AMP
®
HydraPro MR11 Underwater Light
AUL-8002-B-BZ
Install Base
Base
Anchor
Ground
Screw
Washer
1. Place the base onto the desired
location and mark three points
on the ground for the anchors.
2. Remove the base and drill prop-
er holes for the anchors using the
marks as guides.
3. Push anchors into drilled holes.
4. Attach the base onto the anchors
by placing the washer onto the
screw and threading the screw
into the anchor to secure the
base. Tighten the screw with a
screwdriver.
NOTE: Installations such as ponds or fountains do not require
the fixture to be secured with screws. The fixture will be held
into place using it’s own weight. In those cases, this step can
be skipped.
Wire Connection
Strip both leads from the luminaire pigtail. Using two wire connectors
(sold separately), connect the leads from the fixture body to the main
supply cable leads.
Pigtail
Main Supply Cable
Supply Cables
Wire Connectors
