INSTALLATION & MAINTENANCE GUIDE
–4–
w w w. a m p l i g h t i n g . c o m
–4–
2
1
[email protected] • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
3
AMP
®
Radix or Helix Bollard
APL-301X-XX-4-B-BZ
AMP
®
Radix or Helix Bollard
APL-301X-XX-4-B-BZ
Install Stakes to Fixture
Install Stakes to Ground
Wire Connection
Lay down the fixture body on a flat surface. Screw the couplers into the
mounting holes on the bottom of the fixture body then thread the stakes
onto the couplers. Hand tighten to secure the stakes onto the fixture
body.
Fixture Body
Determine the desired location for
the fixture. Clear away an area in
the ground and lay the luminaire
pigtail into the wireway slot. Insert
stakes into the ground until flange
of stakes are flush to grade.
NOTE: If the ground is hard and
stakes are difficult to install, make
a crosscut in the ground using a flat
shovel.
Stake
Soil
Ground
Pigtail
Strip both leads from the luminaire pigtail. Using two wire connectors
(not provided), connect the leads from the fixture body to the main
supply cable leads.
Pigtail
Main Supply Cable
Wire Connectors
