INSTALLATION & MAINTENANCE GUIDE
–4–
w w w. a m p l i g h t i n g . c o m
–4–
Wire Connections
3
Install Lens
3
[email protected] • 813.978.3900
INSTALLATION & MAINTENANCE GUIDE
AMP
®
DescentPro Hardscape Light
AHS-7004-4-B-BZ
AMP
®
DescentPro Hardscape Light
AHS-7004-4-B-BZ
Place the lens back onto
the luminaire and secure
with the removed screws
on Step 1.
Luminaire
Lens
Screw
Install Lens
4
Luminaire
Lock Screw
Wall Anchors
Attach the luminaire onto your
desired location and secure with the
lock screws.
Note: Wall anchors are required for
certain installation conditions (brick
wall, concrete call, etc.). Place a
mark on the wall for the wall anchors
using the holes on the base. Remove
the base and drill proper holes on
the wall and then insert the wall
anchors.
Strip both leads from the luminaire
pigtail. Using two wire connectors
(sold separately), connect the leads
from the luminaire to the main low
voltage supply cable leads.
Luminaire
Wire Connector
Main Low Voltage Supply Cable
Pigtail
Install/Replace Bulb
Loosen the screws on the lens, remove the lens to expose the bulb and
replace it with correct wattage and type marked on the fixture label. Then
reinstall the lens to the fixture.
IMPORTANT: Bulbs must be protected from moisture and dust at all times.
Always reinstall the lens when removed.
