–6–
–6–
[email protected] • 813.978.3900
–7–
Install/Replace Lamp
Strip both the leads from the luminaire pigtail. Using two wire
connectors (sold separately), connect the leads from the luminaire to
the main supply cable leads.
Pigtail
Main Supply Cable
Wire Connectors
8
Install Fixture to Stake
Loosen the set screw on glare guard, remove the glare guard and the lens
to expose the lamp. Replace it with the correct wattage and type marked
on the fixture label. Then reinstall the lens and glare guard and tighten
with the set screw.
IMPORTANT: Lamp must be protected from moisture and dust at all times.
Always reinstall the lens and glare guard when moved.
