ASD 220 Slide Dryer
Service Manual
---1---
ASD 220 Slide Dryer
Service Manual
1
、
The Service Manual of the instrument is compiled according to its structure and
characteristic.
2
、
Power supply of the instrument is AC110V/220V.
Slide Drier can heat up and control temperature.
3
、
A
、
The screen has no display when the machine turns on.
1
）：
The instrument is not plugged in or the fuse is blow out, please connect the
power supply again or replace the fuse.
2
）：
power module is damaged
Maintenance
：
Use Philip screwdriver to loosen
the six screw in the base-plate
，
and take
down the base-plate
，
and there will be a
power source module on the main board in
the instrument as it shows on the picture.
And take down the power source module
from the main board by hand
，
if it is difficult
to take down the power source module with
hand
，
you can use the flat apparatus as flat
Heating film Figure sensor
IC
Power source module Solid state relay
General Provisions
Configuration
Troubleshooting
