7
Position the unit so the operator has easy access to the pressure
washer and its controls.
Do not use the pressure washer outdoors if it is raining, and do
not spray the motor or any of its connections.
Do not use chemicals or agents which are not compatible with
Buna-N, PVC (polyvinyl) or neoprene covering of the hose.
Do not use acids or caustic material with this unit.
Damage due
to use with incompatible material will not be considered for
warranty.
Always test a small area to avoid possible damage to surfaces.
1.
2.
3.
4.
5.
o
peraTIng
I
nsTruCTIons
d
urIng
o
peraTIon
Turn on water supply to pump inlet.
Plug the power cord into a properly grounded 20 Amp, 120 volt
outlet.
Purge air from system by removing nozzle and squeezing gun
trigger before starting machine. Let water run until there is a
steady stream of water coming out of the nozzle.
Turn power switch on Pump Unit to “on” ( I ) position.
Squeeze trigger on gun to start machine.
1.
2.
3.
4.
5.
s
TarTIng
The
p
ressure
W
asher