User Manual for AML Oceanographic’s Micro
X
9
Maintaining the Instrument
Periodic Maintenance
Periodic preventative maintenance will prolong the life of the instrument. The following steps are
recommended:
If the instrument is very dirty or oily, allow it to soak in warm, soapy water before cleaning
with a rag or soft brush. When finished, rinse with fresh water to remove any residual soap
or dirt.
Before each use:
o
Check for proper installation of the Xchange™ sensor.
o
Check for nicks and cuts on the cable.
After each use:
o
Clean and rinse the instrument using fresh water.
o
Dry the instrument completely, and store it in a cool, dry place.
Monthly:
o
Lightly lubricate the connector contacts with 3M silicone spray or equivalent. Avoid
the use of grease. It can create internal pressure and push past the connector
seals on the pins.
o
Lubricate the end cap retainer rings with silicone grease.
Yearly:
o
Send the instrument or Xchange™ sensors to a service centre for diagnostics and
re-calibration
