GOTO: Opens a menu which enables you to skip to a
particular timeline by keying in the exact time. Use
up\down key to increase and decrease time.
SUBTIT: Controls the Subtitles. Allows users to switch
them on, off and zooming on the subtitles by pressing
the same button.
COMB: Allows playing background music while viewing
pictures.
VIDEO: The key of video output signal switching. When
properly connected with the local TV but no TV show.
Please click this button to switch the output signal, when
the output signal match the television image will be
displayed.
A
：
Power Indicator / Remote Sensor
B
：
USB interface
C
：
SD/MMC
D
：
Power input
E
：
Coaxial digital audio output
F
：
YUV output
G
：
AV Composite video signal output
3. Product Diagram
RESET: Press this key in the root directory , the machine back to factory default
settings ( video output will become PAL composite video)
VIDEO: Allows users to change the video outputs as per the regions and television.
To obtain the correct output keep pressing the button until you reach the correct
video output for your TV. This button should be used to change the video output if
the device is properly connected and nothing is visible on the TV screen which is
primarily due to a clash in the FLASH TV Player's output and your TV's input
signals.
Plug the supplied A/V cable (Red, White, Yellow) into the TV's CVBS,
left channel, right channel. Then plug other end of the cable into
AMKETTE FLASH TV's A/V socket.
Plug one end of the YUV video line (Green, Blue and Red) on the local
Y, Pb/Cb, Pr/Cr. Now connect the other side of the Green, Blue and
Red cable with the high-definition TV input (Green, Blue and Red). At
the same time connect AV Video red, white Cable to the machine's left
channel, right channel (audio output), Connect the other end of the
red and white lines in the TV audio input.
5. AV Video Signal Connection
6. YUV HD Connect
7. Points to Remember
Power Indicator/
Remote Sensor
USB
SD
MMC
Power Input
Coaxial digital audio output
YUV output
AV Composite video signal
output
4. Remote Control
