RRE2-A/101
19/27
rre2-a101_g_en_101
10. Configuration
All configuration of
RRE2-A/101
unit can be performed via Ethernet interface.
Some changes in setting will take effect after restarting the unit.
10.1. Factory setting
Unit is fitted with
“RSTR” button to restore unit into factory setting. The button
should be pressed while switching ON unit’s power supply. The OK LED blinks
after successful performance of factory setting.
The “RSTR” button is accessible through small hole on unit’s front panel.
Fig. 11 -
Location of “RSTR” button
