Amit ODG851-0TCP001, User Manual, Page: 62 / 330

Outdoor Cellular Gateway
62
Time Schedule A Must filled setting
Apply a specific Time Schedule to this rule; otherwise leave it as (0) Always .
If the dropdown list is empty ensure Time Schedule is pre ‐ configured. Refer to
Object
Definition > Scheduling > Configuration tab.
Network ID
(SSID)
1. String format : Any
text
2. The box is checked
by default.
Enter the SSID for the VAP, and decide whether to broadcast the SSID or not.
The SSID is used for identifying from another AP, and client stations will associate
with AP according to SSID. If the broadcast SSID option is enabled, it means the
SSID will be broadcasted, and the stations can associate with this device by
scanning SSID.
STA Isolation
The box is checked by
default.
Check the Enable box to activate this function.
By default, the box is checked; it means that stations which associated to the same
VAP cannot communicate with each other.
Authentication
1. A Must filled setting
2. Auto is selected be
default.
For security, there are several authentication methods supported. Client stations
should provide the key when associate with this device.
When Open is selected
The check box named 802.1x shows up next to the dropdown list.

802.1x (The box is unchecked by default)
When 802.1x is enabled, it means the client stations will be authenticated by
RADIUS server.
RADIUS Server IP (The default IP is 0.0.0.0)
RADIUS Server Port (The default value is 1812)
RADIUS Shared Key
When Shared is selected
The pre ‐ shared WEP key should be set for authenticating.
When Auto is selected
The device will select Open or Shared by requesting of client automatically.
The check box named 802.1x shows up next to the dropdown list.

802.1x (The box is unchecked by default)
When 802.1x is enabled, it means the client stations will be authenticated by
RADIUS server.
RADIUS Server IP (The default IP is 0.0.0.0)
RADIUS Server Port (The default value is 1812)
RADIUS Shared Key
When WPA or WPA2 is selected
They are implementation of IEEE 802.11i. WPA only had implemented part of IEEE
802.11i, but owns the better compatibility .
WPA2 had fully implemented 802.11i standard, and owns the highest security .

RADIUS Server
The client stations will be authenticated by RADIUS server.
RADIUS Server IP (The default IP is 0.0.0.0)
RADIUS Server Port (The default value is 1812)
RADIUS Shared Key
When WPA / WPA2 is selected
It owns the same setting as WPA or WPA2 . The client stations can associate with
this device via WPA or WPA2 .
When WPA ‐ PSK or WPA2 ‐ PSK is selected
It owns the same encryption system as WPA or WPA2. The authentication uses
pre ‐ shared key instead of RADIUS server.
When WPA ‐ PSK / WPA2 ‐ PSK is selected
It owns the same setting as WPA ‐ PSK or WPA2 ‐ PSK . The client stations can
associate with this device via WPA ‐ PSK or WPA2 ‐ PSK .
Encryption
1. A Must filled setting.
2. None is selected be
Select a suitable encryption method and enter the required key(s).
The available method in the dropdown list depends on the Authentication you