Amit IOG851-0T031 User Manual Download Page 91

Page: 91 / 389

Industry Cellular Gateway

2.3.3 Advanced Configuration

This device provides advanced wireless configuration for professional user to optimize the wireless

performance under the specific installation environment.

Please note that if you are not familiar with the WiFi

technology, just leave the advanced configuration with its default values, or the connectivity and performance

may get worse with improper settings.

Go to

Basic Network > WiFi > Advanced Configuration

Tab.

Select Target WiFi

Target Configuration

Item

Value setting

Description

Module Select

A Must filled setting.

Select the WiFi module to check the information of connected clients.

For those single WiFi module products, this option is hidden.

Operation Band

A Must filled setting.

Specify the intended operation band for the WiFi module.

Basically, this setting is fixed and cannot be changed once the module is

integrated into the product. However, there is some module with selectable

band for user to choose according to his network environment.

Setup Advanced Configuration

Summary of Contents for IOG851-0T031






































































































































































































































































































































































































Search results

Summary of Contents for IOG851-0T031

Reviews:

Amit IOG851-0T031, User Manual, Page: 91 / 389

Search results

Summary of Contents for IOG851-0T031

Reviews: