Amit CDD531AM-U02 User Manual Download Page 23

Page: 23 / 75

C. PPP over Ethernet

Activate WWAN for Auto-Failover

: With this function enabled, when the

Ethernet WAN connection is broken, the device will automatically activate the

WWAN connection and keep you connected to internet with the alternative

WWAN broadband service. Meanwhile, if the device detected that the Ethernet

WAN connection is recovered, your broadband connection will be switched to use

the Ethernet WAN service.

PPPoE Account

and

Password

: The account and password your ISP assigned

to you. For security, this field appears blank. If you don't want to change the

password, leave it blank.

Connection Control

: There are 3 modes to select:

Connect-on-demand

: The device will link up with ISP when the clients send

outgoing packets.

Auto Reconnect (Always-on):

The device will link with ISP until the

connection is

established.

Summary of Contents for CDD531AM-U02












































































Search results

Summary of Contents for CDD531AM-U02

Reviews:

Related manuals for CDD531AM-U02

Brands by name

Popular brands

Amit CDD531AM-U02, User Manual

Search results

Summary of Contents for CDD531AM-U02

Reviews:

Related manuals for CDD531AM-U02

Brands by name

Popular brands