The Amino US/Asia Remote
Page 9
4.1 TV Brand Codes
In order for the remote to transmit the correct signals to control the TV, the
remote must be programmed with a 3-digit code corresponding to the type
of TV in use.
This is done in the following way:
•
Identify the make of the TV that is in use. E.g. Sony, Magnavox etc.
•
Find the TV make listed in the branding table in Appendix A.
•
Simultaneously press and hold the TV
and OK buttons on the
remote.
•
After approximately 2 seconds, the TV button will light.
•
Release the TV and OK buttons – the TV button remains illuminated.
•
Now enter the 3-digit brand code according to the make of the TV
that is being controlled.
•
As each of the digits are entered, the TV button will briefly flash off
and on again
•
When the third digit has been entered, the TV button will go out.
•
If a TV brand code has been entered that the remote does not
recognize, the TV button will flash rapidly for a second and remain
illuminated. If this happens, re-enter the correct TV brand code.
•
Verify that the remote control works with the TV.
Most TV makes have more than one brand code listed in the brand code
table – if this is the case try all brand codes that are listed for that make until
a suitable match is found.
If no brand code is listed for the TV, try brand codes for Philips and NEC
TVs.
