Connect an optical S/PDIF cable to the S/PDIF optical output of
Kamai 7XM and to the S/PDIF optical input of your A/V amplifier
or home cinema system.
Warning! The Kamai 7XM must only be used with the supplied
power adapter.
Connect the power adapter to the DC power input of Kamai 7XM,
then connect the power adapter to the mains supply. The power
adapter provided will be specific to your region. Ensure you have
the correct power adapter for your region. If you are unsure,
contact your service provider.
99-708904-62 Rev. 01-00 AM-011261-DS v1
4. Connecting Kamai 7XM to power supply
3. Connecting Kamai 7XM to an A/V amplifier
FCC statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that
may cause undesired operation of the device.
IMPORTANT NOTE:
RF exposure warning statement:
1. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
2. This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimetres between the radiator and your body.
Product disposal information - EU only
Amino products are labelled in accordance with the WEEE Directive and
therefore should not be disposed of with other household or commercial
waste. For residential users: please remove any batteries and dispose of
them and the product in accordance with your local authority’s recycling
processes. For further information please contact your local authority or
the retailer where the product was purchased.
For business users: business users should contact their supplier and check the
terms and conditions of the purchase contract and ensure that the product is not
mixed with other commercial waste for disposal.
Industry Canada statement
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the
following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that
may cause undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
1. le dispositif ne doit pas produire de brouillage préjudiciable, et
2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements ISED
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement
et votre corps.
Operating information
Operating temperature: 5 °C to 40 °C (40 °F to 104 °F)
Frequency bands and maximum powers:
Bluetooth
BT-EDR: EIRP < 4 dBm
BT-LE: EIRP < 2 dBm
Hereby, Amino Communications Ltd. declares that the radio equipment type
IP Digital set-top box
is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the
following internet address: www.aminocom.com/support
Support and regulatory information
Approvals
2014/53/EU (RED Directive)
2011/65/EU (RoHS Directive)
2012/19/EU (WEEE Directive)
FCC Part 15B:2015+ANSI C63.4:2014
FCC Part 15C (15.247)
Manufactured under licence from Dolby Laboratories. Dolby, Dolby Audio,
and the double-D symbol are trademarks of Dolby Laboratories.
This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights of Rovi Corporation. Reverse
engineering or disassembly is prohibited.
The country code selection feature is disabled for products marketed to the US/Canada.
For support and further regulatory information about this product go to:
www.aminocom.com/support
Manufacturer/importer: Amino Communications Ltd, 1010 Cambourne Business
Park, Cambourne, Cambridge, CB23 6DP, United Kingdom.
Declaration of Conformity
Conformity
IEC 62368-1:2014
CAN/CSA-C22.2 No. 62368-1-14