Amino 002-458-XX-XX Basic Manual Download Page 2

 
 

3  TV Compatibility 

In order for the remote to transmit the correct signals to control the TV, the remote must first be programmed 

with the 3-digit code corresponding to the make and model of TV in use. 

This is done in the following way: 

 

Identify the make of the TV that is to be controlled. For example, Sony, Magnavox, Philips etc, 

and find it in the Table of TV Brand Codes below.

 

  Simultaneously press and hold the TV 

 and OK 

 buttons on the remote – after 

approximately 2 seconds, the TV button will light.  

 

Release the TV and OK buttons – the TV button remains illuminated.  

 

Now enter the 3-digit brand code according to the make of the TV that is being controlled. 

 

As each of the digits are entered, the TV button will briefly flash off and on again 

 

When the third digit has been entered, the TV button will go out. 

 

If a TV brand code has been entered that the remote does not recognise, the TV button will flash 

rapidly for a second and remain illuminated. If this happens, re-enter the correct TV brand code. 

 

Verify that the remote control works with the TV.  

 

If no brand code is entered, or the brand code entered is incomplete, after several seconds, the 

remote will exit the TV brand code entry mode and the TV brand code will be unchanged. 

 

The remotes are supplied by default with TV Brand Code 000. 

Most TV makes have more than one brand code listed in the brand code table – if this is the case try all brand 

codes that are listed for that make until a suitable match is found. 

If no brand code is listed for the TV, try brand codes for common televisions such as Philips and NEC. 

3.1 

Table of TV Brand Codes 

Please note: Certain codes are only available in newer remote controls (including 002-458-01-01 and any part 

number starting with a 5). If it is not available in your remote then after entering it the TV button will flash rapidly 

for a second and remain illuminated. Please contact your STB provider to see if a newer version of your remote 

is available.

TV Manufacturer 

Brand Codes 

ADMIRAL 

041, 045, 091, 102, 108 

AIKO 089 

AIWA 294, 

295 

AKAI 

006, 010, 023, 119, 135, 159, 164, 179, 
189, 198 

AKURA 133 

ALBA 

124, 133, 236 

TV Manufacturer 

Brand Codes 

ALBIRAL 197 

AMSTRAD 130, 

151 

ANAM 117 

ARC EN CIEL 

057 

ARCAM 057, 

076 

ARISTONA 075 

      

 

Amino Communications Ltd: 

Buckingway Business Park, Anderson Road, Swavesey, Cambridge, CB24 4UQ Tel: +44 (0)1954 234 100 Fax: +44 (0)1954 234 101 

US: 

3625 Brookside Parkway, Suite 150, Alpharetta, GA 30022 Tel: +1 678 636 6000 Fax: +1 678 636 6001 

Email: [email protected], Website: www.aminocom.com 

 

Summary of Contents for 002-458-XX-XX








Reviews: